The Alliance is the entry arm of the Origin Live range. Built for performance and affordability it represents a big step up from other budget arms and will reward you with vastly improved dynamics, clarity and detail.

People often ask if this arm is better than the fully modified OL1 which was reviewed time and again to be preferable to the SMEV, Ekos, Arrow etc. The good news is that this arm outperforms a fully moded OL1 and represents staggering value for money. Having said this the higher arms in our range go A LOT further.

Features

The design philosophy of the Onyx is derived from the legendary Silver tonearm.

• High grade aircraft alloy, single piece armtube.

• Innovative but highly effective low cost bearings (similar to knife edge design).

• High grade Internal Litz wire and standard external cable with RCA plugs to fit into your amplification.

• Integral VTA adjustment.

• Fits ALL Rega armboard cut outs whether old style threaded base or new 3 point mounting.

For fitting guidance see arm fitting

We suggest you order a stylus force gauge £8 to set tracking force if you don't have one - see options tab at the top of this page.

£250

Buy It Now

Features & Specification

Options

VTA Adjusters

All MK3 arms from Encounter upwards have integral VTA adjustment and do not require VTA adjusters. more info

	UK Retail	Export Retail
Universal threaded VTA Adjuster more info	25.50	21.25
Sliding VTA Adjuster* more info	49	40.83
Rega VTA Adjuster more info	12.25	10.21

*Rega threaded bases included on all MK1 & MK2 arms from Silver upwards.

Stylus Force Gauges more info

All prices quoted in GBP	UK Retail	Export Retail
Ortofon Stylus Force Gauge (included on all arms from Encounter upward)	8.17	6.81
Digital Stylus Force Gauge	65.00	52.00
Cartridge Man Digital Force Gauge	203.23	169.36

Cartridge Man Isolator (for tonearm / cartridge interface) more info

	UK Retail	Export Retail
Cartridge man isolator for moving magnet cartridges	86.81	72.34
Cartridge man isolator for moving coil cartridges	86.81	72.34

Armboard & Adaptors

	UK Retail	Export Retail
Technics Armboard more info	46	38.33

SME Adaptor more info	49	39.20
LP12 Armboard more info	27.50	22.92

Connectors

	UK Retail	Export Retail
Cardas 5 din pin Male Arm external connector in base of arm	25.50	21.25
Cardas 5 din pin Female Connector on external cable for base of arm	46	38.33
XLR Termination High Grade Balanced XLR plugs & Cable for OL & Rega arms	25.50	21.25
BNC plugs on external cable For Naim amps	25.50	21.25

Upgrade Cables

	UK Retail	Export Retail
Burn in Cable for arms	15.30	12.75
Linear flow 2 external cable (included as standard on Conqueror & Enterprise.)	388	323.33

Counterweights

	UK Retail	Export Retail
Optional Counterweights (Not compatible with Enterprise)
Light counterweight 11mm thick	46	38.33
Medium counterweight 13mm thick	46	38.33
Medium counterweight 16mm thick	46	38.33
Heavy counterweight 20mm thick	46	38.33
Counterweights with fine adjusters (Not compatible with Enterprise)
Medium Counterweight 13mm thick with Fine adjuster weight	66.50	55.42
Medium Counterweight 16mm thick with Fine adjuster weight	66.50	55.42
Heavy Counterweight 20mm thick with Fine adjuster weight	66.50	55.42
Enterprise Only Counterweights
Medium Counterweight 16mm	56	46.67
Medium Counterweight 16mm thick with Fine adjuster weight	76.50	63.75
Heavy Counterweight 20mm	56	46.67
Heavy Counterweight 20mm thick with Fine adjuster weight	76.50	63.75

Tonearm Spares

	UK Retail	Export Retail
Arm clip	26.00	21.45
Large base nut	12.00	9.90
Cork washer	5.00	4.13
Side bias rod	3.00	2.48
Side bias loop	9.00	7.43
Side bias weight and thread	35.75	29.50
Lift lower device	47.00	38.78

Reviews

There are currently no reviews for this product.

	UK Retail	Export Retail
Universal threaded VTA Adjuster	25.50	21.25
Sliding VTA Adjuster*	49	40.83
Rega VTA Adjuster	12.25	10.21